Messermeister Custom Kullens Santoku Knife | 7" German Steel | Hollow-Ground Blade

Messermeister was founded in 1981 by Bernd and Debra Dressler. In 1992, they redefined German knife design by introducing demi-bolster construction so the entire edge could be sharpened from heel to tip, and set a new sharpness standard with polished 15° edges. After Bernd passed away in 2002, daughters Chelcea and Kirsten joined their mother Debbie in the business. In 2010, the sisters assumed leadership, making Messermeister the only fully women-owned and operated knife company in the world. Debbie Dressler passed away in 2025 after 44 years leading the company. This 8-inch chef's knife is crafted from cold-rolled, laser-cut Thyssen-Krupp 1.4116 German stainless steel with a ceramic stonewashed finish. It features a hand-finished 3-stage edge at 57 HRC hardness and a flat grind blade design. The linen micarta handle and demi-bolster construction make this a knife that does what a knife is supposed to do: cut things, sharpen easily, and last. Handcrafted in Solingen, Germany, which we're told is very serious about knives. This one has a demi-bolster, which means you can sharpen the whole edge instead of leaving a dull sad patch at the heel like some kind of quitter. Comes with a stonewashed finish that hides scratches, because even if you're careful, knives lead hard lives. Cold-rolled, laser-cut Thyssen-Krupp 1.4116 German stainless steel Ceramic stonewashed finish Hand-finished 3-stage 15° edge at 57 HRC hardness Flat grind blade design Demi-bolster construction allows sharpening from heel to tip Blade length: 8.03 inches Blade width: 2.13 inches Spine thickness: 2.5mm Overall length: 13.35 inches Linen micarta handle, 5.35 inches including bolster Ambidextrous use Sharp enough that you'll finally admit your tomato-slicing problems were skill-based Handcrafted in Solingen, Germany

A 3.5-inch paring knife handcrafted in Solingen, Germany by Messermeister, the only fully women-owned and operated knife company in the world. The blade is made from Thyssen-Krupp 1.4116 German stainless steel with a ceramic stonewash finish, hand-finished with a 3-stage 15-degree edge, flat grind, and 57 HRC hardness. The linen micarta handle is ambidextrous and built around Messermeister's signature demi-bolster construction — introduced in 1992 to let you sharpen the entire edge from heel to tip, not just part of it. Still made using hot-drop hammer forging, one of the few companies anywhere still doing it the traditional way. The family that runs it has been at this for over 40 years, first as distributors, then as designers who decided German knives could be sharper if someone just polished the edge to 15 degrees instead of settling for whatever everyone else was doing. Small enough to fit in your hand without drama. Sharp enough that you'll stop mangling cherry tomatoes and start slicing them like a functional adult. Linen micarta doesn't care if you leave it wet on the counter, which frankly puts it ahead of most houseguests. Blade: Thyssen-Krupp 1.4116 German stainless steel, ceramic stonewash finish Hand-finished 3-stage 15° edge, flat grind, 57 HRC hardness Demi-bolster construction for full-edge sharpening Hot-drop hammer forged in Solingen, Germany Linen micarta handle, ambidextrous design Overall length: 7.91 inches (201 mm) Blade length: 3.54 inches (90 mm), width: 0.83 inches (21 mm), spine thickness: 1.5 mm Sharp enough that your cutting board has trust issues Handle width (including bolster): 4.41 inches (112 mm)

Jeremy Dougherty spent nine years and twenty iterations building a glove that works the way a glove should — and this is the Rarely edition, with our logo debossed on the leather. Full grain water buffalo, reinforced palm, elasticized wrist to keep debris out. The buffalo leather has natural heat resistance and stretches over months into the exact shape of your hand. Full grain water buffalo leather Reinforced double-leather patch at palm heel Elasticized wrist — secure fit, no debris sneaking in Natural heat resistance Debossed Rarely logo & wordmark Sizes XS, S, M, L, XL, 2XL Designed by Jeremy Dougherty, 4th-generation Coloradan Free U.S. shipping

The Y-350 is Toyo’s proper toolbox — bigger, burlier, with a cambered lid and an extendable top handle for hauling it around. Still pressed from one piece of steel, still seamless, still watertight. Use it for actual tools, art supplies, or literally anything you want to carry in something that looks and feels like it was built to last a very long time. Single-piece pressed steel, camber lid, seamless and watertight Extendable top handle 14" × 5.9" × 4.3" Made in Japan by Toyo Steel Could store tools; will also store whatever you decide matters

A complete solo camping kitchen that boils water using twigs, pine cones, and whatever's on the ground. The Kelly Kettle Trekker uses a double-wall chimney design to bring 20oz of water to a rolling boil in minutes with no fuel canisters, no propane, no babysitting a fire. Just feed it dry biomass and let physics do the rest. This kit turns the fire-base into a full cooking station: the included hobo stove insert converts it into a wood-burning stove for the pot and pan, the two-piece grill lets you cook over coals or stabilize the pot, and the gripper handle means you can move hot cookware without regretting your life choices. The pot/fire-base support either holds food over the chimney while the kettle boils, or sits under the fire-base to keep your picnic table from getting scorched. Stainless steel throughout. Packs into itself. Comes with a 12oz camping cup with folding handles and a drawstring bag to keep it all together. For solo trekkers, kayakers, scouts, and anyone who'd rather gather sticks than carry fuel. **Kit includes:** Trekker Kettle (20oz / 0.6L) with fire-base Small cook set: 16oz / 0.45L pot, frying pan (doubles as pot lid), gripper handle Two-piece grill for cooking over coals or stabilizing the pot Small hobo stove insert — turns fire-base into wood-fueled cooking stove Pot/fire-base support for cooking over chimney or protecting surfaces 12oz / 350ml camping cup with silicone CooLip and folding handles Drawstring storage bag Boils water using whatever fell off a tree recently

Tanner Goods designs these in their Portland studio and makes them in the USA from 10–11oz English Bridle leather — thick enough to hold its shape for years, never the kind of belt that curls or flops. The nickel-plated heel bar buckle is clean and understated, and the edges are dyed, burnished, and waxed by hand. Works with denim, chinos, cords, and whatever else is in your rotation. 1.25″ wide 10–11oz English Bridle leather Nickel-plated heel bar buckle Edges dyed, burnished, and waxed Hand-stamped Tanner Goods maker’s mark Designed in Portland, made in USA Gets better looking every year you own it